SDSPI and FatFS Test

SDSPI and FatFs Test

SDSPI Test on Verilator

Build the sdspi_test project:

cd build/sim-a7-100/gw/projects/sdspi_test
make sdspi_test_sim_sw

Create and format the SD Card image file (or just use the sdcard.img files checked into the test/ subdirectory of the sdspi_test project):

dd if=/dev/zero of=sdcard.img bs=512 count=131072
mkfs.fat -F 16 sdcard.img

Execute the generated Verilator model. Pass in the sdcard.img file:

./Vmodel -s sdcard.img

You should now see the following messages appear in the terminal window. The traces prefixed with SDSPI: come from the SDSPI co-simulator. The first two lines and the last line come from the test bench. The other lines are printf() statements coming from the test program running on the RISCV processor.

SD Image File: /home/epsilon/sdcard.img
SDCARD: NBLOCKS = 131072


SDSPI testing program

Initializing the SD-Card
SDSPI: CMDIDX = 6 -- WE HAVE A COMMAND # 0! [ 40 00 00 00 00 95 ]
SDSPI: Received a command 0x40 (0) arg 0x0
...
READ: Seek to sector 3
Write sector 2
Read sector 3
SDSPI: CMDIDX = 6 -- WE HAVE A COMMAND #17! [ 51 00 00 00 02 71 ]
SDSPI: Received a command 0x51 (17) arg 0x2
Reading from block 00000002 of 00020000
READ: Seek to sector 2
        Ctrl-RSP: 00000000
Read sector 2
Test is complete
SDSPI Test successful.

SDSPI Test on Arty A7

Hook up the MicroSD PMOD as described here.

Note that this is a destructive test. The contents of the SD card will be destroyed.

Build the sdspi_test project in an Arty A7 build tree (arty-a7-35 or arty-a7-100):

cd build/arty-a7-35/gw/projects/sdspi_test
make sdspi_test_bit_sw

Connect a terminal program such as Putty or Teraterm to Arty's USB serial port. Settings: 115200 8N1.

Download the generated bitstream file to the Arty A7:

make sdspi_test_load

Verify the test program's output in the terminal. You should see something like this:

SDSPI testing program

Initializing the SD-Card
CMD0 - the INIT command
Testing the AUX register
CMD1 - SEND_OP_COND, send operational conditions (voltage)
CMD8 - SEND_IF_COND, send interface condition
...
Write sector 2
Read sector 3
        Ctrl-RSP: 00000000
Read sector 2
Test is complete
SDSPI Test successful.

FatFS Test on Verilator

Build the fatfs_test project:

cd build/sim-a7-100/gw/projects/fatfs_test
make fatfs_test_sim_sw

Create and format the SD Card image file (or just use the sdcard.img files checked into the test/ subdirectory of the fatfs_test project):

dd if=/dev/zero of=sdcard.img bs=512 count=131072
mkfs.fat -F 16 sdcard.img

Execute the generated Verilator model. Pass in the sdcard.img file:

./Vmodel -s sdcard.img

You should see the following messages in the terminal window. The traces prefixed with SDSPI: come from the SDSPI co-simulator. The first two lines and the last line come from the test bench. The other lines are printf() statements coming from the test program running on the RISCV processor.

SD Image File: /home/epsilon/sdcard.img
SDCARD: NBLOCKS = 131072
Starting fatfs_test...
SDSPI: CMDIDX = 6 -- WE HAVE A COMMAND # 0! [ 40 00 00 00 00 95 ]
SDSPI: Received a command 0x40 (0) arg 0x0
...
SDSPI: TOKEN!!
LEN = 514
CHECKING CRC: (rx) f8cd =? f8cd (calc)
FatFS Test Completed Successfully!
Test passed.

One of the steps taken by the test program is to create a LOG.TXT file with the contents This is a test. We can mount the sdcard.img on Linux and check if that file exists with the expected contents:

sudo mount -o loop ~/sdcard.img /mnt/sd
ls -al /mnt/sd
cat /mnt/sd/LOG.TXT
This is a test.
sudo umount /mnt/sd

FatFS Test on Arty A7

Hook up the MicroSD PMOD as described here.

Note that this is a destructive test. The contents of the SD card will be destroyed.

Build the fatfs_test project in an Arty A7 build tree (arty-a7-35 or arty-a7-100):

cd build/arty-a7-35/gw/projects/fatfs_test
make fatfs_test_bit_sw

Connect a terminal program such as Putty or Teraterm to Arty's USB serial port. Settings: 115200 8N1.

Download the generated bitstream file to the Arty A7:

make fatfs_test_load

Verify the test program's output in the terminal. You should see something like this:

Starting fatfs_test...
Mounting...
CID: 534d5402:47323341:7d604971:3168018d
Opendir...
Creating file...
Writing...
Closing file...
Re-opening file for reading...
Reading...
Closing file...
Comparing...
f_printf test...
FatFS Test Completed Successfully!

One of the steps taken by the test program is to create a LOG.TXT file with the contents This is a test. Eject the SD card, insert it into your PC, and verify that LOG.TXT exists with the expected contents.