DDR Test

DDR Test Image on Verilator

Build the test project:

cd build/sim-a7-100/gw/projects/ddr_test
make ddr_test_sim

Execute the generated Verilator model in interactive mode:

./Vmodel -i

You should see something like this:

This is a simulation.
Initializing SDRAM @0x20000000...
Switching SDRAM to software control.
Switching SDRAM to hardware control.
SDRAM init OK.
Memory Test through port 0:
Memtest at 0x20000000 (32.0KiB)...
  Write: 0x20000000-0x20008000 32.0KiB
   Read: 0x20000000-0x20008000 32.0KiB
Memtest OK
Memory port 0 test successful.
DDR instruction access test:
Successfully executed code from DDR.
Test Successful.

DDR Test Image on Arty A7

Build the test project:

cd build/arty-a7-100/gw/projects/ddr_test
make ddr_test_bit

Connect a terminal emulator such as Putty or Minicom to Arty's USB serial port. Settings: 115200 8N1.

Run the project:

make ddr_test_load

Verify the test program's output in the terminal. You should see something like this:

DDR Test on Arty A7.